this document describes part-number-speci? changes to recommended operating conditions and revised electrical speci?ations, as applicable, from those described in the general mpc7455 risc microprocessor hardware speci?ations (order # mpc7455ec/d). speci?ations provided in this document supersede those in the mpc7455 risc microprocessor hardware speci?ations , rev. 0 or later, for the part numbers listed in table a only. speci?ations not addressed herein are unchanged. because this document is frequently updated, refer to http://www.motorola.com/semiconductors or to your motorola sales of?e for the latest version. note that headings and table numbers in this document are not consecutively numbered. they are intended to correspond to the heading or table affected in the general hardware speci?ation. part numbers addressed in this document are listed in table a. table a. part numbers addressed by this data sheet motorola part number operating conditions signi?ant differences from hardware speci?ation cpu frequency (mhz) v dd t j (?) xpc7455rx600nc 600 1.3 v ?50 mv 0 to 105 modi?d core voltage speci?ations to reduce power consumption. xpc7455rx733nc 733 1.3 v ?50 mv 0 to 105 modi?d core voltage speci?ations to reduce power consumption. xpc7455rx800nc 800 1.3 v ?50 mv 0 to 105 modi?d core voltage speci?ations to reduce power consumption. xpc7445rx600nc 600 1.3 v ?50 mv 0 to 105 modi?d core voltage speci?ations to reduce power consumption. xpc7445rx733nc 733 1.3 v ?50 mv 0 to 105 modi?d core voltage speci?ations to reduce power consumption. a d v ance in f ormation MPC7455RXNXPNS/d r e v . 0, 2/2002 mpc7455 p a r t number speci t cation f or the xpc74x5rxnnnnx se r i e s motorola part numbers affected: xpc7455rx600nc xpc7455rx733nc xpc7455rx800nc xpc7445rx600nc xpc7445rx733nc xpc7445rx800nc
2 mpc7455 part number speci?ation for the xpc74x5rx nnn nx series motorola features 1.1 features this section summarizes changes to the features of the mpc7450 described in the mpc7450 hardware speci?ations . power management 1.3-v processor core 1.4 general parameters core power supply:1.3 v ?50 mv dc nominal 1.5.1 dc electrical characteristics table 4 provides the recommended operating conditions for the mpc7455 part numbers described herein. xpc7445rx800nc 800 1.3 v ?50 mv 0 to 105 modi?d core voltage speci?ations to reduce power consumption. note: the x pre? in a motorola part number designates a ?ilot production prototype as de?ed by motorola sop 3-13. these are from a limited production volume of prototypes manufactured, tested, and q.a. inspected on a quali?d technology to simulate normal production. these parts have only preliminary reliability and characterization data. before pilot production prototypes may be shipped, written authorization from the customer must be on ?e in the applicable sales of?e acknowledging the quali?ation status and the fact that product changes may still occur while shipping pilot production prototypes. table 4. recommended operating conditions characteristic symbol recommended value unit core supply voltage v dd 1.3 v ?50 mv v pll supply voltage av dd 1.3 v ?50 mv v note: these are the recommended and tested operating conditions. proper device operation outside of these conditions is not guaranteed. table a. part numbers addressed by this data sheet (continued) motorola part number operating conditions signi?ant differences from hardware speci?ation cpu frequency (mhz) v dd t j (?)
motorola mpc7455 part number speci?ation for the xpc74x5rx nnn nx series 3 general parameters table 7 provides the power consumption for the mpc7450 part numbers described herein. table 7. power consumption for mpc7450 processor (cpu) frequency unit notes 600 mhz 733 mhz 800 mhz full-power mode typical 8.4 10.3 11.2 w 1, 3 maximum 11.9 14.5 15.9 w 1, 2 doze mode typical w 1, 2, 4 nap mode typical 1.4 1.7 1.8 w 1, 2 sleep mode typical 700 800 900 w 1, 2 deep sleep mode (pll disabled) typical 470 490 500 mw 1, 3 notes: 1. these values apply for all valid processor bus and l3 bus ratios. the values do not include i/o supply power (ov dd and gv dd ) or pll supply power (av dd ). ov dd and gv dd power is system dependent, but is typically <20% of v dd power. worst case power consumption for av dd < 3 mw. 2. maximum power is measured at nominal v dd while running an entirely cache-resident, contrived sequence of instructions which keep the execution units, with or without altivec, maximally busy. 3. typical power is an average value measured at nominal v dd in a system while running a typical code sequence. 4. doze mode is not a user-de?able state; it is an intermediate state between full-power and either nap or sleep mode. as a result, power consumption for this mode is not tested.
4 mpc7455 part number speci?ation for the xpc74x5rx nnn nx series motorola ordering information 1.11 ordering information 1.11.1 part numbers addressed by this speci?ation table 20 provides the ordering information for the mpc7450 part described in this document. 1.11.3 part marking parts are marked as the example shown in figure 27. figure 27. motorola part marking for bga device table 20. part marking nomenclature xpc 74 x 5rx nnn x x product code part identi?r package processor frequency 1 application modi?r revision level xpc 2 7455 7445 rx = cbga 600 733 800 n: 1.3 v ?50 mv 0 to 105 c c: 2.1; pvr = 8001 0201 notes: 1. processor core frequencies supported by parts addressed by this speci?ation only. parts addressed by other speci?ations may support other maximum core frequencies. 2. the x pre? in a motorola part number designates a ?ilot production prototype as de?ed by motorola sop 3-13. these are from a limited production volume of prototypes manufactured, tested, and q.a. inspected on a quali?d technology to simulate normal production. these parts have only preliminary reliability and characterization data. before pilot production prototypes may be shipped, written authorization from the customer must be on ?e in the applicable sales of?e acknowledging the quali?ation status and the fact that product changes may still occur while shipping pilot production prototypes. bga notes : ccccc is the country of assembly. this space is left blank if parts are assembled in the united states. mmmmmm is the 6-digit mask number. atwlyywwa is the traceability code. xpc7455 rx800nc mmmmmm atwlyywwa 7455 bga xpc7445 rx8000nc mmmmmm atwlyywwa 7445
motorola mpc7455 part number speci?ation for the xpc74x5rx nnn nx series 5 ordering information
6 mpc7455 part number speci?ation for the xpc74x5rx nnn nx series motorola ordering information
motorola mpc7455 part number speci?ation for the xpc74x5rx nnn nx series 7 ordering information
MPC7455RXNXPNS/d how to reach us: usa/europe/locations not listed: motorola literature distribution; p.o. box 5405, denver, colorado 80217 1-303-675-2140 or 1-800-441-2447 japan: motorola japan ltd.; sps, technical information center, 3-20-1, minami-azabu minato-ku, tokyo 106-8573 japan 81-3-3440-3569 asia/pacific: motorola semiconductors h.k. ltd.; silicon harbour centre, 2 dai king street, tai po industrial estate, tai po, n.t., hong kong 852-26668334 technical information center: 1-800-521-6274 home page: http://www.motorola.com/semiconductors document comments: fax (512) 933-2625, attn: risc applications engineering nformation in this document is provided solely to enable system and software implementers to use motorola products. there are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. motorola reserves the right to make changes without further notice to any products herein. motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does motorola assume any liability arising out of the application or use of any product or circuit, and speci?ally disclaims any and all liability, including without limitation consequential or incidental damages. ?ypical parameters which may be provided in motorola data sheets and/or speci?ations can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?ypicals must be validated for each customer application by customer s technical experts. motorola does not convey any license under its patent rights nor the rights of others. motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the motorola product could create a situation where personal injury or death may occur. should buyer purchase or use motorola products for any such unintended or unauthorized application, buyer shall indemnify and hold motorola and its of?ers, employees, subsidiaries, af?iates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that motorola was negligent regarding the design or manufacture of the part. motorola and the stylized m logo are registered in the u.s. patent and trademark of?e. digital dna is a trademark of motorola, inc. all other product or service names are the property of their respective owners. motorola, inc. is an equal opportunity/af?mative action employer. ?motorola, inc. 2001
|
